Acoustic Doors
Wilcox Acoustic Doors
Wilcox Doors
Acoustic Doors Door frame
shall be designed in accordance to the National Building Code. The framing members shall be fabricated from structural steel members designed to withstand and transmit the loads to the building structure. Door thickness will not be less than one and three quarter inches. Door Sheeting - Door frame shall be covered with a minimum 16 gauge satin coat steel on both sides. Door Stops - Doors stops shall be standard channel type, and shall be shipped loose. Hardware - Hardware schedule to be determined by the contractor, including some or all of the following: hinges, door closer, lock set, flush bolt, panic bar (for double door c/w coordinator). Doors shall be mortised and/or reinforced as required for proper hardware installation.
Acoustical Bi-Parting Door with Pass Door 25'x 14' STC 58
Since 1912 Wilcox Door
Wilcox Door has designed and manufactured doors to the most difficult acoustical requirements.
We have tested to STC 60 (at the Riverbank Laboratories)
We supply products for Industrial, Performing art centers, theaters, schools, and government testing facilities. Available in vertical lift, sliding, swings, folding, and specialty & oversize applications.
Door are available in structural, stainless steel, concrete or when required special facings for the required appearance for high end projects.
Acoustical Three Leaf Vertical Lift 30' x 31' STC 45
Contact Us By Phone
Toronto - (416) 698-8892 Mississauga - (905) 274-5850 Cambridge - (519) 650-9320 Hamilton - (905) 523-7727